pgtruspace's blog

about things that interest me.

Solar Density

graph of seismic wave speeds through the solar body

 Seismic wave speed graph

The above is my reconstruction from the Wolff – Patrone paper, figure 6 graph referenced at:
The left gauge is seismic speed and the bottom is solar radius.

The red line represents the helioseismic sound speed relative to that would be expected in a uniform standard model sun. The shading is to give a better visual of the density changes as the wave travel speed up or down from the norm. Faster in more dense levels and slower in levels less dense.

In the paper the region of 0.65r to 0.72r seems to be the level that would have the most PE for cell overturn and positive contribution to solar output due to barycenter effects. This would seem to me to be a positive indication of “conveyer belt” motive power.

Once again the solar body is postulated to have little or no effect from solar system center of gravity as it is a body in free fall. They still neglect inertia of the solar mass although they do take into effect the suns’ rotational energies.

Wolff & Patrone call for the fusion fuel to be better supplied to the solar furnace due to the lower level cell mixing in the 0.16r to 0.3r layer. I agree that that is the most likely area for the fusion forge to be located but the mixing in that level from “cells” is, by their own admission very small.

The 0.72r to surface looks to be the solar face that we are used to. 😎 I am glad to see what is behind the shades. The real surface may be at the 0.72r line.

The stepped changes in speed relative to the expected straight line speed changes due to depth compression of the solar material gives us a better insight of the interior conditions of the sun. The basic premiss is that the more solid levels transmits waves faster then less solid levels. What conditions would result in changes in solidity? The possibilities are; liquid to solid, vapor to liquid, turbulence and energy vibration levels.

Accelerations in the 0.0r to 0.1r appear to dictate a very solid core. The deep slow down and then increase to the 0.27r level looks to be a region of change phase as upper liquid crystallizes to the lower solid level. The gradual freezing would cause speed changes because of liquid to solid interface interference, faster in clean ridged liquid, slower in mix and faster in clean solid. That step at 0.28r reminds me of the thermal step of heat of fusion in an otherwise smooth sine up to 0.45r and then down to 0.62. though it may well be the level of fusion of free hydrogen into captured neutrons. The level 0.52r to 0.62 would be the area of fission as unbound neutrons convert back to hydrogen to add energy to the “conveyer belt” or “cells”of the the upper 0.62 to 0.72liquid level. The speed changes in this top layer is due to turbulence of the horizontal flows. The straight line of the 0.72r to 1.0r is the compressed hydrogen gas sun, that we all know too well, and is a bit faster then the standard model. This is most likely the result of the averaging of the helioseismic data of the entire sun.  pg


One response to “Solar Density

  1. Pingback: Are Climate changes caused by Solar activity variations ? | pgtruspace's blog

please say something interesting

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: