The Completed, New Old Project

The completed New Airwasher, a miniature Industrial fume scrubber .

see our patent. and patent drawings

We want to put these units out on long term loan to those that donate to our R&D effort, please indicate any interest in this comment thread below…pg

7inch x 12.5inch x 12inch high – 175 x 320mm x 300mm high T6c-Airwasher

The project of the last 2 years  is completed and several of these miniature industrial Airwashers are now being used by friends and my family members. They are testing it’s operation under real conditions of cleaning the air in their homes and to offer their critique on it.

The funnel to the left of the scrubber power  head is for an upended 2 liter soda pop bottle to supply additional makeup water as it evaporates and to maintain the proper operating water level within the machine. see below.

With the supply bottle in operation the machine draws 58 watts of power as it cleans about 60 cubic feet of air a minute, while trapping the pollutants in the 4 liters of water in the clear acrylic plastic tank  below it.  I clean out the tank of my airwashers weekly, but for best results it should be cleaned daily

With the exception of the water tank and the 2 Liter “pop” bottle, all of the plastic parts were created out of about 1 kilogram,  2+ pounds,  of ABS plastic on a small Desktop 3D Printer from files created with a desktop computer. Truly a manufacturing empire on my kitchen table! …pg

Any interest in this device should be added to the comments below…pg

up date: 4 August,  refinements to the scrubbing rotor have reduced the power consumption from 58-60 watts to  55-56 watts, increased the air flow, and reduced the sound levels it produces. I am now re-manufacturing the bearings of the motors to improve their ability to support the rotors weight as it is many times heaver then the pump impeller that the motor was designed for.  …pg